TP link Router Not Working

TP link Router Not Working: Facing the same issue about TP link Router Not Working? Are you looking for TP-link router troubleshoot? Are you facing any kind of issue with your TP-link Router Not Working? If your TP-link Router Not Working then you can follow the step and fix it as soon as possible. You can also take our help to fix your TP-link router.

Need Help - Request a call back now

TP link Router Not Working

A router is a box that allows multiple computers, smartphones, etc to join the exact same network. From that point, the router is typically connected to a modem so as to offer an online connection to any device that’s connected to the router. If you are facing the same issue about TP-link Router Not Working you can fix it here. This guide aims to assist you through the very first-time installation process for your router. If your TP link Router Not Working and looking for support you can raise a call back on our live chat as well.

From the box you may have any of the following:

  • The router’s power supply or charger.
  • Device manual.
  • Driver disk (for some models).
  • USB cable (for some models).
  • Network cable (for some models).

How to fix TP Link Router Not working

There are a few simple steps you can try before getting support from officials. You can check your router cable connection or cable light of the TP-link router. Here are quickstep TP-link router troubleshoots:

  • Restart Your Router to fix TP link Router Not Working

It may fix your issue when you restart your router. Restarting your router may fix your TP-Link router not working issue. Just plug out your router from power and leave it for 2 minutes. After that plugin your router and enjoy your high-speed internet. Restarting your router is also a troubleshoot to check your router basic problems. Check before getting anything done, restart your router, and try to fix it with the restart.

  • Check your Internet availability and fix the TP link Router Not Working

You can contact your ISP provider to ask about the internet. It may be for some time your ISP provider down their network in your area. Before getting any kind of issue contact your ISP provider and ask them about your internet.

  • The issue with ISP:

The web is disconnected from AP or Modem Because of the Issue with ISP. ‘No Connection’ or’Limited’ will look whether you’re connected directly or via the TP-Link router. Wait to determine if internet connectivity restores back by itself. If it doesn’t restart the modem and try again.

If the problem continues, you might want to contact your ISP. If the internet is working fine at AP/Modem’s conclusion, you will need to proceed and concentrate on the problems with the router.

  • Loose connection or weak signals:

If the router is connected over LAN, make sure that the cables are inserted properly and links aren’t loose. If connected over Wireless WAN (Wi-Fi), then be certain the router is stored at a location where it’s receiving adequate signals. When it is not getting good signs, you won’t get an internet connection from it. Change the location of the router and try again.

  • Bridging incorrect configuration:

If you’re using a router for bridging (extending Wi-Fi or replicating ), be certain you are using the same password and station as of your Modem or Access Point. Using a different channel and password will lead to no connectivity or restricted connectivity issue.

So, check WDS Bridge/Repeater settings and confirm that both of these matches with Wi-Fi configurations of Modem or Access Point. Having different SSID doesn’t matter in this instance.

  • DNS:

Google Public DNS works great and might fix your connection issue. You may place this DNS IP address in router DHCP configurations [DHCP > DHCP Settings > Main DNS & Secondary DNS] or you can just put this DNS address on your LAN (Ethernet) or Wi-Fi link settings [Control Panel > Network and Sharing Center > Change Adapter Settings].

To change DNS for Ethernet or Wi-Fi link, Open Ethernet / Local Area Connection / Wi-Fi > Properties > Media > Internet Protocol Version 4 (TCP/IPv4) > Properties > Use the following DNS server addresses. You may change DNS for Internet Protocol Version 6 (TCP/IPv6) too but your ISP may lead to issue if it doesn’t support IPv6.

If you are unable to fix the TP link Router Not Working issue with the DNS option you can proceed to the next troubleshooting.

  • DHCP:

If you’re using TP-Link router as a repeater, extender, WDS bridge (WDS stands for wireless range extension) or to connect multiple computers over LAN and you’re confronting this limited or no connectivity problem, there are higher chances that DHCP is causing IP conflict or it’s failing to assign the IP address. This issue may arise because of firmware glitch or incompatibility between connected devices. A possible fix for DHCP related issues is given below.

If you are unable to fix the TP-link Router Not Working issue with the DHCP option proceed to the next troubleshooting guide.

We’ve discovered that disabling DHCP may correct the restricted connectivity issue. To disable it, log into the configuration panel (settings menu/direction page) of your router by typing in the web browser.

After the menu has opened, start looking for DHCP in the sidebar. Open it and disable it. Restart the router to use the settings.

Before doing it be sure that you have done all essential settings from the router’s configuration/settings menu as after disabling DHCP you will not be able to get it unless you manually assign an IP address to the computer to match the default IP address of this router.

Another easy way to get it is by resetting the router (press the reset button on the router to reset it). You may lose all previously done configurations and settings. So do this at your own cost. This was the quick guide to fix your TP link Router Not Working issue with your router and internet.

Leave a Reply

Your email address will not be published. Required fields are marked *